Basic Operations; Use The Menu - Philips DCB2020 User Manual

Basic operations

Follow the instructions below for more
functions.
Tune to the next FM radio station with
sufficient signal strength at the lower/higher
frequency:
Press and hold /
search.
Tune to the FM radio station at a specific
frequency:
/
Press repeatedly until the
frequency digitals are displayed.
Program FM radio stations automatically:
Press and hold MODE/SCAN or PROG/
CLOCK SET to start the auto programming.
Program DAB radio stations automatically:
Press and hold MODE/SCAN to start the
auto programming.
Program radio stations manually:
1) Tune to a radio station.
2) Press PROG/CLOCK SET to activate the
programming.
3) Press
/ to assign a sequence number
to the radio station.
4) Press PROG/CLOCK SET to confirm.
5) Repeat steps 1-4 to program more radio
stations.
Tune to a preset radio station:
Press / repeatedly.
Switch the audio mode between [STEREO]
(stereo) and [MONO] (monophonic) for FM
radio:
Press OK repeatedly.
Display available information about the
current radio station:
Press RDS/DISPLAY repeatedly.
Synchronize the clock with an RDS radio
station:
1) Tune to an RDS radio station that transmits
time signals.
2) Press and hold RDS/DISPLAY until [CT
SYNC] is displayed.
EN
16
to start the auto

Use the menu

When you listen to radio, you can access the
menu for control options.
1
Press MENU/ .
» FM mode: [SCAN SETTINGS] (scan
setting) is displayed.
» DAB mode: [STATION] (station) is
displayed.
2
/
Press to select a menu option,
and then press OK or
option or enter the lower-level menu.
FM mode:
[SCAN
Search and store radio stations
SETTINGS] automatically: [STRONG]
(strong) for radio stations with
(scan
setting) strong signal only, [ALL] (all) for
all radio stations.
[AUDIO] Select a sound mode: [STEREO]
(stero) or [MONO] (mono).
(audio)
[SYSTEM] [RESET] (reset): Reset all radio
(system) settings to the factory default
status.
[SW VER] (software version):
Display the current version of
the firmware.
[UPGRADE] (upgrade): Upgrade
the firmware.
DAB mode:
[STATION]
Access the list of the previously
(station) stored DAB radio stations.
• Press
station, and then
listening.
[FULL Scan and store DAB radio
SCAN] (full
stations within full range.
scan)
[MANUAL] Tune to a DAB radio station
(manual) manually.
[DRC] Dynamic range control: Select
(DRC) a level for the effect of dynamic
range control.
to confirm the
/
to select a
to start