Table of Contents
Advertisement
HDMI connections
to some
Panasonic
equipment
allow you to interface
automatically.
(p. 25)
® This function
may not work
normally
depending
on the equipment
condition.
® The equipment
can be operated
by other remote
controls
with this function
on even if the TV is in Standby
mode.
® Image or sound
may not be available
for the first few seconds
when
playback
starts.
® Image or sound
may not be available
for the first few seconds
when
input mode is switched.
® Volume
function
will be displayed
when
adjusting
the volume
of the equipment.
® If you connect
equipment
that has "HDAVl
Control
2 or later" function
to the TV with an HDMI cable, the sound from the
DIGITAL AUDIO
OUT terminal
can be output
as multi-channel
surround.
e_ "HDAVI Control
5" is the newest standard
(current
as of December,
2010) for the HDAVI Control
compatible
equipment.
This standard
is compatible
with the conventional
HDAVI equipment.
HDMI (high-definition
multimedia
interface)
allows
you to enjoy
high-definition
digital
images
and high-quality
sound
by connecting
the TV unit and HD devices.
HDMI-compatible
equipment
('1) with an HDMI or DVI output terminal,
such as a Cable or Satellite
box or a DVD player, can be
connected
to the HDMI connector
using an HDMI compliant
(fully wired)
cable.
® HDMI is the world's
first complete
digital consumer
AV interface
complying
with a non-compression
standard.
® If the external
equipment
has only a DVl output,
connect
to the HDMI terminal
via a DVl to HDMI adapter
cable ('2).
® When
the DVl to HDMI adapter
cable
is used, connect
the audio
cable to the audio
input terminal.
e_Audio
settings
can be made on the "HDMI
1 in" or "HDMI
2 in" menu screen.
(p. 34)
Applicable
audio
signal sampling
frequencies
(L.PCM):
48 kHz, 44.1 kHz, 32 kHz
('1):
The HDMI logo is displayed
on an HDMI-compliant
device.
(*2):
Enquire
at your local digital equipment
retailer shop.
(
Caution
)
® Use with a PC is not assumed.
® All signals
are reformatted
before being displayed
on the screen.
® If the connected
device
has an aspect
adjustment
function,
set the aspect
ratio to "16:9".
® These
HDMI connectors
are "type A".
® These
HDMI connectors
are compatible
with HDCP (High-Bandwidth
Digital
Content
Protection)
copyright
protection.
® A device
having
no digital output
terminal
may be connected
to the input terminal
of either "COMPONENT",
or "VIDEO"
to
receive
analog signals.
® The HDMI input terminal
can be used with only the following
image signals:
480i, 480p, 720p, 1080i and 1080p.
Match the output setting
of the digital
device.
® For details of the applicable
HDMI signals,
see p. 41.
You can enjoy your Home theater
by connecting
a Dolby Digital
(5.1 channel)
decoder
and "Multi Channel"
amplifier
to the
DIGITALAUDIO
OUT terminals.
(
Caution
)
® Depending
on your DVD player and DVD-Audio
software
the copyright
protection
function
may operate
and disable
optical
output.
® When
an ATSC channel
is selected,
the output
from the DIGITAL
AUDIO
OUT jack will be Dolby Digital.
When
an NTSC
channel
is selected,
the output will be PCM.
® For viewing the CC of digital broadcasting,
set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
characters might be cut off).
e The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set
to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV's CC button does not
o_perate the Satellite or Cable box's CC function.
e If the CC is set to On on both the receiver and TV when the signal is 48@ (except for the HDMI connection),
the CC
may overlap on the TV.
® If a digital program is being output in analog format, the CC data will also be output in analog format.
e If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
40
Hide quick links:
Advertisement
Table of Contents
