Table of Contents
Advertisement
Why is there no sound coming
from the TV?
_
Make sure the volume is up and MUTE is off.
® Confirm the TV speakers are set to ON by pressing MENU
and selecting "Audio" --> "Advanced
audio". (p. 34)
® Check that the correct SAP (Secondary Audio Program)is
selected by pressing the SAP button on the remote control. (p. 16)
® If the TV is connected to a Panasonic Home Theater via HDMI
cable, then check VIERA Link controls. (p. 29)
If the TV is connected to a Home Theater via optical cable,
then: Check the connection, the audio system is on, the
correct input is selected.
® Check "HDMI 1 in" or "HDMI 2 in" analog/digital
audio
Why is the sound unusual,
distorted, low volume or in
another
language?
Why is there a clicking, ticking
or buzzing
sound coming from
the TV unit?
What is the easiest and best
"t
way to connect a High=Definition 1
Cable or Satellite
box to the TV?i _
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control.
_ Check that all connections of external equipment
connected to the TV are secure.
_ When using Cable or Satellite box, check the device's audio
(2,,x?mple: tj, y changing the.?ox'sAudi?Rang,e ,to 'na_yrowi!j
When TV power is turned on or shut off there are electrical
components that make a click sound. This is normal operation.
cause thermal expansion and contraction that can produce
sounds. This is not a sign of faulty operation or a malfunction.
Use an HDMI cable. It carries both digital video and audio
signal in HD. HDMI cable is the only cable needed to
connect an HD device to the TV.
_# The main unit radiates heat and some of the parts may
become hot. This is normal operation and does not affect
the performance
of the set.
®_Ensure good ventilation.
_ Do not block the ventilation holes of the TV and do not
place the TV on top of other equipment.
Check that the batteries are fresh, are of the same type
and are installed with the correct polarity (+ & -).
using Cable or Satellite boxes or operating non-Panasonic
Blu-ray players, use the remote supplied with the device.
During "First time setup", you indicated in step @-_
that
you are using Cable or Satellite box and in step O-_2_b that
the box is connected to one of the TV's AV inputs. In this
case, the Antenna/Cable
input is deactivated to prevent
unintentional switching into unused tuner. To re-activate,
press MENU, select SETUP and repeat "First time setup".
®
-rl
¢-
CD
3>
G9
c_
C_.
¢-
o
(/)
D
43
Hide quick links:
Advertisement
Table of Contents
