Programme Progress Display; Programme Selector Dial - Electrolux EWD 1409 I Instruction Booklet

Hide thumbs Also See for EWD 1409 I:
Table of Contents

Advertisement

End of programme
When the programme has finished a flashing zero is
displayed. The door can be opened when the "End"
pilot light has gone out and if the Rinse hold
Night Cycle option has not been selected.

13 Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
light illuminate and stay on.
When the programme has finished, the "End" pilot light
comes on.
The "End" pilot light flashes in the event of operating
problems and the corresponding alarm code appears on
the display.
= the machine does not fill
E E 1 1 0 0
= the machine does not empty
E E 2 2 0 0
= the door has not been closed
E E 4 4 0 0
To eliminate the problem, see paragraph "Something not
working".

14 Programme selector dial

The selector is divided into 5 sections:
• Cotton,
• Synthetics
• Delicates
• Handwash /Wool
• Special programmes
Reset programme Off
or
The selector dial can be turned either clockwise or
anticlockwise.
Positions E60° and E40° correspond to the ENERGY
SAVING programmes and position
At the end of the programme the selector dial must
be turned to position OFF (reset).
Functions
End of programme
When the "End" pilot light on the programme progress
display illuminates, the door can be opened (if the Rinse
hold
or Night Cycle option has not been selected).
Turn the programme selector dial to Off.
Switch the machine off by depressing the ON/OFF
button before removing the laundry.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out. Before you make any change,
you must pause the washer dryer by pressing the
Start/Pause button.
Changing a running programme is possible only by
resetting it. Turn the programme selector dial to "Off"
and then to the new programme position. The washing
water in the tub will not emptied out .
Start the new programme by depressing the Start/Pause
button.
9
to "cold wash".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents