The Control Panel - Electrolux EWD 1409 I Instruction Booklet

Hide thumbs Also See for EWD 1409 I:
Table of Contents

Advertisement

The Control Panel

1 Detergent dispenser drawer
The programme chart is in the interior part of the
drawer.
2 M
-
light
AINS
ON
This light comes on when the ON/OFF button is
pressed, and goes out when it is pressed again.
3 ON/OFF button
Press this button to switch the machine on. Press it
again to switch the machine off.
Programme Option buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds and the message
Err is displayed.
4 "Prewash" button
The machine performs a prewash cycle at 30°C max
before the main wash. The prewash cycle ends with a
short spin at 650 r.p.m. in programmes for Cotton and
Synthetics, and with emptying of the water for
Delicates.
This option is not available with the (Wool)
/Handwash programme and Miniprogram.
For use when washing heavily soiled laundry.
5 "Spin speed" button
Press this button to reduce the maximum speed of the
final speed proposed by the machine for the selected
programme or to select position
The light corresponding to the selected option
illuminates.
The following speeds are available for the different
fabrics:
• Cotton, linen: 700/900/1200 max 1400 r.p.m.
• Synthetics and Handwash/(Wool)
700 max 900 r.p.m.
• Delicates and Miniprogram : 700 r.p.m.
The light corresponding to the selected option
illuminates.
Rinse Hold
When Rinse Hold option is selected, the last rinse
water is not emptied out, to prevent the fabrics from
creasing. When the programme has finished, the light
of the Start/Pause button goes out, the Rinse Hold and
"End" pilot lights in the programme progress display
are alight to indicate that the water must be emptied
out.
To empty out water there are 2 possibilities:
• Select programme " Drain":
The water is emptied out without spinning.
• Select programme "Spin": reduce eventually the spin
speed by means of the relevant button and then
depress the Start/Pause button.
The water is emptied out and the laundry is spun at
the selected spin speed.
Attention! Before selecting programmes Drain or
Spin, the selector dial has to be positioned on Off
position (reset).
The Rinse Hold
the automatic Washing & Drying programme.
6
(Rinse Hold).
:
option CANNOT be selected for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents