PURE TWILIGHT Owner's Manual page 17

– No lamp –
Alarm1 set lamp
No lamp
5 minutes
10 minutes
OK
z z z
07:40
OK
PURE Sounds Select a sound to wake up to.
FM Plays the last FM station tuned to.
Tone Sounds a beeping tone.
6. Set the alarm volume (radio and PURE Sounds alarms only).
7. Set the Lamp time. Lamp time is the length of time the lamp will take
to reach full brightness before the alarm sounds (from
1 hour). For example, setting a lamp time of 30 minutes means the
lamp will switch on and slowly get brighter in the 30 minutes before
the alarm sounds.
8. Tap Save, the icon in the icon bar indicates a set alarm. Alarm
time(s) are also displayed on-screen in standby. An outlined icon
means it is set to skip once.
Snoozing or cancelling a sounding alarm
Snooze an alarm by touching the top of the lamp or tapping Snooze.
The alarm will sound again in nine minutes by default. A snoozed alarm
is indicated in standby by an animated 'Z'. (See page 19 for snooze
options.) To cancel a sounding or snoozed alarm, press Standby.
No lamp to
GB
17