Bush BR10DAB Insrtuction Manual page 12

BR10DAB
Using DAB Radio -Continued
Changing the DAB Station Information
It is possible to change the information that is displayed on the second line of the
DISPLAY when listening to a DAB station. There are seven types of information
available as listed below with examples to the right. To change the information
displayed press the INFO button repeatedly.
Dynamic Label Segment (DLS) = This is
scrolling text information supplied by the DAB
station It may comprise information on music
titles or details of the programme and is provided
by the broadcaster.
Signal Bar = Show the transmission signal level.
Program Type (PTY) = This is a description of
the type of programme provided by the DAB
station and is provided by the broadcaster.
Multiplex Name This will show the multiplex
text that is broadcasting the programme you are
listening
Time and Date = This displays the current time
and date and is provided by the broadcaster.
Channel and Frequency = This displays the
channel number and the transmission frequency.
Signal Information = This shows the digital
bit-rate and the signal mode.
Signal Error Rate = If the transmission signal
contains errors the system can apply correction.
The amount of signal correction can be displayed
as a numerical value between 0 and 99. As the
value increases, you will hear the signal degrade.
To improve reception, try adjusting the position
of the antenna. Please note a signal error rate of
30 or more will make the station un-listenable.
12
Press INFO Button
ABC NATIONAL
DLS scrolling
Press INFO Button
ABC NATIONAL
Press INFO Button
ABC NATIONAL
News
Press INFO Button
ABC NATIONAL
ABC NATIONAL DAB
Press INFO Button
ABC NATIONAL
11C 220.352MHz
Press INFO Button
ABC NATIONAL
Signal error 1
Press INFO Button
ABC NATIONAL
80kbps Mono
Press INFO Button
ABC NATIONAL
12:38:33 AM
Press INFO Button Press INFO Button
ABC NATIONAL
28/12/2009
Press INFO Button