Page 1
C O M P A C T D I S C P L A Y E R C O M P A C T D I S C P L A Y E R ONIX AUDIO,LLC ONIX AUDIO,LLC 368 S.McCaslin Blvd # 189 368 S.McCaslin Blvd # 189...
If liquid enters the unit, or a foreign object gets into the enclosure, immediately Do not route the power cord where it will be crushed, pinched, bent at severe disconnect the power cord from the wall and take the unit to an authorized ONIX angles, exposed to heat, or damaged in any way.
WARNING! WARNING! not stack heavy components on top of the XCD-99. Avoid placing the unit where it may be subject to excessive heat, such as on top of a large power amplifier or near To reduce the risk of electrical shock, fires, etc.: a heat register.
Play/Pause Play/Pause These outputs are located on the back of your XCD-99 and are labeled Fixed Press to play the CD. Make sure your amplifier is set to the correct input. The Analog Out. Connect these to outputs to your amplifier's CD or any other line-level display window will show the track playing(number one) and the elapsed time of input using the supplied or a suitable interconnect cable.
Page 5
Using The Remote Control Using The Remote Control XCD-99 will begin playing your selected tracks. The XCD-99 will remain in PROGRAM mode until you open the disc drawer or press the Play button then Stop Note: Install the two AA batteries supplied before trying to use your remote control.
There is no need to hit the play button. Once the desired track is located(shown in the display window), remove your finger. The player will automatically begin The XCD-99 is a digital audio device that has been designed to very high standards of electromagnetic compatibility.
Need help?
Do you have a question about the XCD-99 and is the answer not in the manual?
Questions and answers