Panasonic Workio DP-C305 Scan/Email Manual page 13

Push the Slot Cover to open it.
Insert a PCMCIA/PC Card Adapter as
illustrated. (Label side up)
7
Select "PC Card".
Only one storage device can be selected at
a time. When the "PC Card" is selected as
the storage device, the scanned image
cannot be saved to the SD Memory Card
and Hard Disk Drive at the same time.
If the setting of Function Parameter "84 SD/
PC Card Function" (General Settings > Key
Operator Mode) is set to "No", the
Confirmation screen displays the "Function
not available" error message and beeps.
If you do not touch any key for 3 seconds, or
select "Close" on the Touch Panel Display,
the machine will display the previous
screen.
For more details, refer to General Settings
in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
8
Press the Start key.
The scanned image is saved in the following
directory of PCMCIA/PC Card.
Directory: \PRIVATE\MEIGROUP\PCC\DI\IMAGE
The data saved on the memory card in the
PCMCIA/PC Card Adapter can be printed by
this machine or another DP-C322*, DP-C262*,
DP-C354*, DP-C264*, DP-C323*, DP-C263*,
DP-C213*, DP-C405, DP-C305, and DP-C265.
For more details, refer to Printing from SD
Memory Card/PC in the Operating Instructions
(For Basic Operations) of provided booklet.
When printing PDF or high-compression PDF
data, install and set up the Memory Card Print
Utility. For details, refer to the Help section of
the Memory Card Print Utility on the Document
Management System CD-ROM.
* Requires optional Printer Controller
Module for printing PDF data.
9
Push the Eject button on the right side
of PCMCIA/PC Card Slot, and then
remove the PCMCIA/PC Card Adapter.
Eject button
Do not remove the PCMCIA/PC Card Adapter
while the Access Indicator is flashing.
10
Close the Slot Cover.
When cancelling the operation, press the Stop key
on the Control Panel, and then select "Yes" on the
Touch Panel Display.
13