Extension Cords; Oven Lamp Replacement - GE Monogam JET343G Use And Care Manual

Use of Extension Cords
A short power-supply cord is provided to reduce the
risks resulting from becoming entangled in or tripping
over a longer cord.
Longer cord sets or extension cords are available and
may be used if care is exercised in their use.
If a long cord or extension cord is used—
1. The marked electrical rating of the cord set or
extension cord should be at least as great as the
electrical rating of the appliance;
If oven light burns out, you may replace it by
carefully following the directions below:
Step 1: Disconnect oven power cord from electrical
outlet.
Step 2: Unscrew and remove
oven light bulb cover located
on left side of cabinet. Do
not remove any other part
of cabinet.
32
(continued)

OVEN LAMP REPLACEMENT

2. The extension cord must be a grounding-type
3-wire cord;
3. The longer cord should be arranged so that it will
not drape over the counter top or tabletop where it
can be pulled on by children or tripped over
unintentionally.
If you use an extension cord, the interior light
may flicker and the blower sound may vary when
the microwave oven is on. Cooking times maybe
longer, too.
Step 3: Let bulb cool before removing. Gently twist
the bulb to break the silicone adhesive attached to the
bulb and socket to prevent damage during shipping.
Turn bulb counterclockwise to remove from socket.
Step 4: Replace bulb with a special 20 watt light bulb.
Insert bulb into socket and turn in clockwise direction.
Step 5: Replace light bulb cover.
Step 6: Plug oven power cord into electrical outlet.
Reset oven clock.