Operating Sequence - Electrolux EW 1478 F Instruction Booklet

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
P0876
.
.
P0877
4. Switch the machine on
To switch the machine on, press the ON/OFF button
: the mains-on light comes on.
AÇMA
KAPAMA
If the programme selector dial is on the RESET O
position, three flashing dashes will be displayed. If
the programme selector dial is positioned on a wash
programme, a flashing zero will be displayed.
5. Select the desired programme
Turn the programme selector dial to the desired
position: the lights corresponding to the different
phases making up the selected programme light on.
The display shows the duration of the programme.
6. Select the spin speed or option
Depress the spin speed button to choose the
required speed or option
comes on.
1400
900
700
500
SIKMA
18
---
0
ÖN YIKAMA
YIKAMA
DURULAMA
SUDA
BEKLETME
BOSALTMA
SIKMA
FILTRE IKAZ
PROGRAM
SONU
: the corresponding light