Multi Channel Input (External Decoder) - Pioneer VSX-839RDS Operating Instructions Manual

TV
Connect your TV to the jacks as shown below. Hook up the signal with either component video (not possible for
the VSX-839RDS), S-video, or composite video cords (the quality descends in this order) but remember, the
video component you are watching and your TV must be hooked up with same type of video cord or you won't
be able to see the picture.Before making or changing the connections, switch off the power and disconnect the
power cord from the AC wall outlet.
*The arrows indicate the direction of the TV signal.
VSX-859RDS

Multi Channel Input (External Decoder)

In some cases you may want to have your source material (DVD, etc) decoded externally. If you find you need a
multi channel external decoder hook one up as shown below, but for most people this component is
unnecessary (For more on this see p. 55).Before making or changing the connections, switch off the power and
disconnect the power cord from the AC wall outlet.
*The arrows indicate the direction of the video signal.
Components equipped with
7.1 (5.1) channel analog output jack
ANALOG
SURR- SUB CENTER
OUND BACK WOOFER
L
R
(For the VSX-859RDS only)
The COMPONENT VIDEO OUT jack can be used to get a TV picture
memo
but it doesn't show this receiver's on screen display (OSD).
FRONT
SURR-
OUND
L
L
R R
Connecting Your Equipment
TV/monitor
VIDEO IN
COMPO-
NENT
VSX-859RDS
VIDEO
Y
S-VIDEO
P
B
P
R
17
En