Advertisement
INSTRUCTIONS
Bluetooth Function Operation
Enter/exit
Touch [ Bluetooth ] icon in the main interface to enter the bluetooth interface.
Touch
icon to exit bluetooth interface.
Pair/link
To use Bluetooth hand-free function, make connection first, i.e. match the host with the
Bluetooth mobile phone.
Operation methods:
Set the host to be matching state, and open the Bluetooth of your mobile phone and use
the mobile phone to search device, the mobile phone shall prompt to match password
with the Bluetooth when it has searched the Bluetooth device.
Input Bluetooth password (0000) to the mobile phone and confirm. The mobile phone
shall prompt whether authorize to this device,please select [Yes]. Phone and Bluetooth
shall automatically connect within 20 seconds. Under any working mode, the host shall
convert to Bluetooth state if there is an incoming call. And the host shall restore to current
mode after hanging up.
When the Bluetooth device matches with this device, the connection status shall
display "Connected", otherwise, it shall display "No connection".
Dialing
You can dial on mobile phone directly or input phone number through the number buttons
on the screen, click
to delete if there is input error.
After input the phone number, click
Click
during a call so as to switch the voice between car speaker and mobile phone.
Call records
Click
to access call records interface as below PIC 2:
Received calls: Touch this button to check all the phone numbers of received calls.
Dialed numbers: Touch this button to check all the dialed phone numbers.
Missed calls: Touch this button to check all the phone numbers of missed calls.
Bluetooth volume
Click
to access Bluetooth volume interface as below PIC 3:
PIC 1
to make a call, and click
to hang up the phone.
PIC 2
Previous song
PIC 3
11
Radio Function Operation
Enter/exit
Touch [ RADIO ] icon in the main interface to enter into the radio interface.
Touch
icon to return to main interface, and then touch other function icons so as to exit
radio mode.
Band selection
Click [BND] icon so as to switch among AM1, AM2, Fm1,FM2, FM3 bands.
Search/Save radio stations
Short press [Scan] icon to browse the stored radio stations.
FM band can save 18 radio stations (Six stations for FM1/FM2/FM3), AM band can save
12 radio stations (Six stations for AM1/AM2).
Scan radio
Short press
Long press
Sound setting
Click [EQ] icon can switch to different sound mode.
Mute on/off
Click [Mute] icon to turn on/off mute function
TFT on/off
Click
icon to turn off TFT, and then click the screen area so as to turn on TFT.
Click
icon so as to slide screen angle.
Play/pause
Next song
icon to manually fine-tune radio stations upward/downward.
icon to automatically search and save radio stations.
08
INSTRUCTIONS
Advertisement
