Advertisement
INSTRUCTIONS
REMOTE CONTROL FUNCTION
28
POWER ON/OFF
AMS / RPT
MUTE
TITLE
AUDIO
SOURCE
SET PLAYING TIME
EQ
SUBTITLE
SEEK+ / SEEK-
PBC / MENU
VOL+ / VOL-
UP / DOWN / L / R ENTER
SEL
SLOW
LOUD
BAND / P / N
ANGLE
SETUP
LOC / RDM
OSD
STOP
PLAY / PAUSE
ZOOM
ST / PROG
MENU
O-10+
DSP
1.POWER
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. SOURCE Button
Press this button to choose audio sources.
4. EQ Button
Press this button to choose POP、ROCK、
CLASSIC、EQ off.
5. SEEK+ (
)/ SEEK-(
) Button
In normal playback MP3、USB、SD songs,
Press this button to previous song or next
song.
6. VOL+ (
) / VOL- (
)
Press this button to increase or decrease
volume level.
7. SEL Button
Press this button to choose sound feature.
8. LOUD Button
Press this button to startup LOUD function.
9. BAND-P/N Button
In radio mode, press this button to choose
band.
In VCD、DVD mode, press this button to
choose AUTO、PAL or NTSC system.
10. LOC/RDM Button
In radio mode, press this button to switch
between local and direction.
In VCD、CD mode,press this key to randomly
play.
11. STOP Button
Press this button to stop playing.
12. PLAY/PAUSE Button
Press this button to switch between play and
pause.
In stop mode, press this button to play.
13. ST/PROG Button
In radio mode, press this button to choose
stereo or mono station.
In audio mode, it can help STOP button to
programmed play.
05
Audio setting
Click
icon on setup interface to access audio setting interface, as shown in
diagram:
You can turn on or turn off the existing functions on audio setting interface.
Steering wheel setting
I. Click
icon on setup interface so as to access steering wheel setting interface.
II.Connect anode and cathode of direction control wire of the car with anode and cathode of
direction control wire of this device, and press the buttons on steering wheel one by one
and record the corresponding sequence and functions, then click [Allocation].
III. Click the button of steering wheel needs to be allotted so as to select the corresponding
setting function, such as volume +.
IIII. Buttons on steering wheel shall display the corresponding functions, such as volume + .
To modify function settings, repeat procedures 3~4. Click [Enter] to save the settings.
To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat
procedures 3~4 for resetting.
Touch calibration
If touch calibration error occurs, you can adjust the touch coordinate by "Touch calibration".
Click
icon on setup interface, input password [888888] to confirm to access touch
calibration interface, as shown in below diagram:
Touching methods
Use touch pen to click the center of "+" icon, and move along with center of "+" icon so as
to calibrate the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall be
affected.
INSTRUCTIONS
right(PIC 1)
PIC 1
14
Advertisement
