Advertisement
Table of Contents
AMEREC STEAMBATH GENERATORS
(MODELS: AK5, AK7, AK10 w/K60 CONTROL)
FOR THE SAFETY OF YOU AND YOUR FAMILY PLEASE READ THE
WARNINGS TO THE RIGHT AND ALL INSTRUCTIONS BEFORE USING
YOUR STEAMBATH.
POST "STEAMBATH INSTRUCTIONS" LABEL OUTSIDE STEAMBATH
FOR SAFETY WARNINGS.
SAVE THIS MANUAL
Thank you for purchasing your new AMEREC steam generator. If we can be of any assistance
do not hesitate to call our Service Department at 1-800-331-0349.
4209-24 12-09-02
AK Series w/K60 Control Owners Manual
WARNING
Electric Shock Hazard - High voltage exists
within this equipment. There are no user
serviceable parts in this equipment. All
installation and service to this equipment
should be performed by qualified licensed
personnel.
Do not exceed 30 minutes in a steambath.
Excessive exposure can be harmful to your
health. Excessive exposure can produce a
rapid pulse, light-headedness, weakness
or fainting. If you become uncomfortable
or experience any of the above conditions
exit the steambath immediately.
Steambaths can put stress on the body.
Therefore a steambath should be used
only under a doctor's direction if you:
Are pregnant
Have a heart condition
Have high blood pressure
Have circulatory problems
Are under the influence of alcohol
Are under the influence of drugs
Have diabetes
Are under the care of a physician
Are in generally poor health
Children should only use the steambath
under close adult supervision.
Scald Hazard: Do Not Touch the steam
head or trim during operation as they are
HOT. Stay at least 12 inches away from the
hot steam escaping from the steam head.
Be careful when entering a steambath.
Escaping steam from an overheated steam
room may cause injury.
Advertisement
Table of Contents
Related Manuals for Amerec AK10 w/K60
Summary of Contents for Amerec AK10 w/K60
- Page 1 Escaping steam from an overheated steam room may cause injury. SAVE THIS MANUAL Thank you for purchasing your new AMEREC steam generator. If we can be of any assistance do not hesitate to call our Service Department at 1-800-331-0349. 4209-24 12-09-02...
- Page 2 AK Series w/K60 Control Owners Manual page 2 SECTION 1A: STEAM GENERATOR OVERVIEW The standard K60 model steam generator control the steam room and an optional secondary steam'' feature automatically engages cutting features an adjustable 60 minute time and tem- control is available to mount in an alternate steam production back to a single element to perature control with digital display.
- Page 3 The troubleshooting guide is meant as a general aid only. There are no user serviceable parts in the generator. All repairs should be performed by a qualified service person. For additional assistance or the factory authorized service person nearest you call: AMEREC's Service Department at 1-800-331-0349.
- Page 4 AK Series w/K60 Control Owners Manual page 4 P.O. Box 2258, Woodinville WA 98072 425-951-1120 Fax: 425-951-1130 email address: amerec @ amerec .com 4209-24 12-09-02...
Need help?
Do you have a question about the AK10 w/K60 and is the answer not in the manual?
Questions and answers