Preparations For Initial Start-Up; Prestart Inspection - Universal M3-20A Operator's Manual

PREPARATIONS FOR INITIAL START-UP
PRESTART INSPECTION
Before starting your engine for the first time or after a pro-
longed layoff - check the following items.
o
Check the engine oil1evel; add oil to maintain the level at
the high mark on the dipstick.
o
Check the fuel supply and examine the fuel filter/separator
bowls for contaminants.
o
Check the transmission fluid level.
NOTE:
Refer to the specifications pages in this manual for
fuel, oil, and transmission types and quantities.
RECOVERY
TANK
o
Check the DC electrical system. Inspect wire connections
and battery cable connections.
o
Visually examine the unit. Look for loose or missing
parts, disconnected wires, unattached hoses, and check
threaded connections.
o
Check the coolant level in the plastic recovery tank and at
the manifold.
NOTE:
If
the engine has not yet been filled with coolanT. refer
to
the ENGINE COOLING CIRCUIT section of this manual.
_DIPSTICK
MANIFOLD
(M-35B SHOWN)
7