HP EliteBook 8570p Maintenance And Service Manual page 143

9. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Remove the rubber screw covers (1). The rubber screw covers are available in the Rubber
Kits, spare part numbers 641192-001 (for use only on HP EliteBook 8570p Notebook PC
computer models) and 686303-001 (for use only on HP ProBook 6570b Notebook PC
computer models).
b. Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel to
the display assembly.
c. Flex the inside edges of the bottom edge (1), the left and right sides (2), and
the top edge (3) of the display bezel until the bezel disengages from the display enclosure.
Component replacement procedures
135