Table of Contents
Advertisement
panel. The display will automatically return to the volume indication 5 seconds
after the last adjustment is made.
8) FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing
the Select knob (3) five times so the "FAD" indication appears on the display
panel. Within 5 seconds of choosing the Fader mode, turn the knob clockwise to
fade the sound to the rear speakers or counter-clockwise to fade the sound to
the front speakers. The fader position will be shown by the bars on the display
from F
volume level between the front and rear speakers is equal, F
will be shown on the display panel. The display will automatically return to the
volume indication 5 seconds after the last adjustment is made.
9) AM/FM BAND INDICATOR
Each time this button is pressed, the radio band is changed. The indication
"AM", "FM1", or "FM2" will appear on the display panel according to your
selection.
10) MANUAL UP/DOWN TUNING (
AUTOMATIC SEEK TUNING
To manually select a radio station, momentarily press the Up Tuning (
side of the button to advance the unit one digit higher or Down Tuning (
side of the button to tune downward. Continue to press either side of the button
to tune the radio rapidly in the selected direction.
11) AUTO-STORE SYSTEM (AS)
PRE-SET SCAN TUNING (PS)
Press this button momentarily to scan the 5 stations pre-set into the memories of
the AM band or the 10 stations of the FM band. The unit will stop at each pre-set
station for 5 seconds before continuing to the next pre-set station (the pre-set
number on the display panel will flash during this operation). Press the button
again momentarily to stop the Pre-set Scan operation and remain on the selected
frequency.
Pressing this button for longer than 2 seconds will activate the Auto-Store
System (AS) which will automatically scan and enter up to 5 stations into the pre-
set memories on the band in use. If you have already set the pre-set memories
to your favorite stations, activating the Auto-Store function will erase those
stations and enter the new ones. This feature is most useful when traveling in a
new area where you are not familiar with the local stations.
12) STATION PRE-SET MEMORIES
To set any of the 5 pre-set memories in each band, use the following procedure:
1. Turn the radio on and select the desired band.
R (full front) to F
TUNE
3
R (full rear). When the
)
R
)
)
Advertisement
Table of Contents
