Compatible Plcs, Pts And Programmable Relay - Omron CS1W User Manual

• Limitations when Using the NT Support Tool's System Installer
1) Windows 98 and Windows Me
The system program cannot be downloaded to the PT through the USB-Serial
Conversion Cable.
2) Windows 2000, Windows XP, Windows Vista, Windows 7 and Windows 8
Only communications ports COM1 and COM2 can be used. Always change the
communications port allocation for this device to COM1 or COM2 in the Microsoft
Windows Device Manager (see note 1) and specify that port in the NT Support Tool's
communications settings. Once the communications port is specified correctly in the
Windows Device Manager and the NT Support Tool's communications settings, the
system program can be downloaded to the PT through the USB-Serial Conversion
Cable.
Note: In most personal computers, COM1 is allocated to the RS-232C port and

Compatible PLCs, PTs and Programmable Relay

The following OMRON PLCs, PTs and Programmable Relay are supported by the
compatible software applications.
• PLCs
CS/CJ-series, CP-series, C-series (see note 1), and CVM1/CV-series
• PT
NS-series and NT-series
• Programmable Relay
ZEN (see note 2)
Note 1. The following C-series PLCs are supported: C200HS, C200HX/HG/HE, C200H, C1000H,
Note 2. The ZEN Programmable Relay is supported only if ZEN Support Software Ver. 3.0 or later
communications port COM2 can be allocated to the Conversion Cable. Refer to Changing
the Allocated Communications Port on page 38 for details on changing the communications
port. Furthermore, if there is another driver using the allocated port, that driver must be
uninstalled.
C2000H, CQM1, CPM1, CPM1A, CPM2A, SRM1, CQM1H, and CPM2C.
is used.
Specifications
11