Recording - AerialBox T1020 User Manual

T1020-PVR Manual.ai 15 5/19/2011 5:21:49 PM T1020-PVR Manual.ai 15 5/19/2011 5:21:49 PM

Recording

Instant Record:
This is done by pressing the record button on the remote.
Pressing it will start recording on the channel you are currently watching and allow you to
select the duration of the recording. The default duration is to the end of the current
programme. You can select to the end of the following programme or manually enter a
duration by pressing the left/right navigation keys.
Timer Recordings:
This is done through the EPG. Access the EPG by pressing the EPG button on
the remote. It will bring up the guide from which you can then browse to
choose a programme to record.
C
M
Y
CM
MY
CY
CMY
K
If you wish to cancel a recording, all you have to do is go back into the EPG menu, to the programme you selected
for recording. Pressing the Red button again will ask wheather you wish to cancel the recording or not.
Wakeup Timer - Recording:
From here you can manually set timer recordings. This is done
through Main Menu/System Configuration/Wakeup Timer. By
going down to the "Waking Mode" and scrolling across to
"Recording" the options beneath will change to accomodate
the new wakeup mode, giving you choices of Channel, Date,
Time and Duration.
Pressing the Red button on a select show in the EPG menu will mark
the programme to be recorded. If the programme is part of a series
you will have the option of recording the while series (Yellow button)
or just this episode (Blue button)
15