Power Supply Unit - Yamaha Disklavier Mark IV Pro series Quick Manual

Press the [ON] side of the [MAINS] switch on the
3

Power Supply Unit. (

Operating Manual")
Press the [ON] side of the [MAINS] switch on the
4
I/O Center. (
Manual")
on the Media Center starts flashing green.
Wait until
then go to step 5.
Note:
This may take several minutes.
Press
5
The Disklavier is turned on and the [Main] screen appears.
The touch screen changes as follows:
Note:
This may take approximately two minutes.
Note:
When turning the Disklavier back on after shutting down, be sure to wait
10 seconds before doing so.
Tip:
Pressing
case, be sure to press
pg. 5 in "Advanced
pg. 4 in "Advanced Operating
on the Media Center stops flashing and dimly lights green, and
.
on the Media Center also turns the Disklavier on. In such a
to turn on the Pocket Controller as well.
Chapter 1: Basic Operations
[Main] screen
5