Recording To An Existing Smf Song - Kawai CN43 Owner's Manual

Page
44
STOPPING SMF SONG PLAYBACK
Step 7
Press the PLAY/STOP button.

5) RECORDING TO AN EXISTING SMF SONG

This function allows any of the 16 parts (tracks) of the SMF song to be re-recorded.
First follow 'Playing an SMF Song' steps 1-3 to select the desired SMF song, then proceed from step 4 below.
Step 4
Press the REC button.
5
SELECTING THE PART (TRACK) TO RECORD
Step 5
Press the VALUE buttons to select the Part (track) to be recorded.
STARTING THE RECORDER
Step 6
Press a key on the keyboard.
The LED indicator for the PLAY/STOP button will turn off,
and the selected SMF fi le will stop playing temporarily.
Press the PLAY/STOP button once again to continue
playback, or the RESET button to reset the playback
position to the beginning.
Once song playback has stopped, press the MENU buttons to
return to the fi le selection screen, or the USB button to exit the
recorder.
The LED indicator for the REC button will start to fl ash to
indicate that the recorder is in standby mode.
The SMF Recorder screen will be shown in the LCD
display.
Part 10 is reserved as a drum track. When selecting Part 10, only drum sounds
can be played. Similarly, drum sounds can only be played on Part 10.
When the Rec Part is set to MIDI, all data received from the MIDI IN jack will
be recorded on Parts 1-16, according to the MIDI channel.
The LED indicators for the REC and PLAY/STOP buttons
will turn on, and recording will start on the selected track.
Recording can also be started by pressing the PLAY/STOP button, allowing
a rest period to be inserted at the beginning of the SMF fi le.
Rec Part= 1
Bar= 1- 1 Œ=100
Rec Part= 1
Bar= 1- 1 Œ=100