Split - Kawai CN43 Owner's Manual

Page
14

3) SPLIT

The SPLIT function divides the keyboard into two sections—upper and lower—allowing each part to be played
with a different sound.
Step 1
Press the SPLIT button.
2
The LED indicator for the SPLIT button will turn on.
The LED indicator for the upper SOUND SELECT button will also be turned on, while the LED indicator for the
lower SOUND SELECT button will start to fl ash.
The names of the selected upper and lower sounds will also be shown in the LCD screen.
Concert Grand Concert Grand
/Wood Bass /Wood Bass
Step 2
Press and hold the SPLIT button, then press a key on the keyboard.
The pressed key will become the lowermost note for the upper section.
Step 3
Play the keyboard.
Different sounds will be produced in the upper and lower sections.
An ensemble performance can be enjoyed by playing the chords and the melody with the right hand, while playing
a bass line with the left hand.
Step 4
To change the upper sound while SPLIT mode is enabled, press the desired SOUND SELECT button.
The LED indicator for the selected SOUND SELECT button will turn on.
Press the same button repeatedly to select another sound variation assigned to that button.
ON
The '/' symbol will be displayed in the bottom left corner of the LCD screen,
indicating that split mode has been activated.
The default split point is set between F#2 and G2. This point can be moved to
any key on the keyboard.
Lower section Lower section
Split point Split point
Upper section Upper section
Hold down the button. Hold down the button.