Split Mode - Kawai ES7 Owner's Manual

Split Mode

The Split Mode function divides the keyboard into two sections, allowing each section to be played with a different
sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
1. Entering Split mode
Press the SPLIT button.
The LED indicator for the SPLIT button will turn on to indicate
that Split mode is in use.
* The default split point is set between keys F # 2 and G2.
The LED indicator for the upper section sound button will turn
on, and the LED indicator for the lower section sound button
will start to flash. The respective sound names will also be
shown in the LCD display.
Upper section sound
Concert Grand
/Wood Bass
Split
enabled
Lower section sound
2. Changing the upper/lower section sounds
To select a different sound for the upper section:
Press the desired SOUND button.
Jazz Organ
/Wood Bass
To select a different sound for the lower section:
Press and hold the SPLIT button, then press the desired SOUND
button.
Jazz Organ
/W.Bass & Ride
* The Lower Octave Shift setting can be used to adjust the octave range
of the lower section. Please refer to page 97 for more information.
* The Lower Pedal setting can be used to enable/disable the damper pedal
for the lower section. Please refer to page 98 for more information.
* Preferred Split mode upper/lower sound combinations can be stored
to a Registration memory for convenient recall. Please refer to page
34 for more information.
20
Default Split mode:
The previously selected sound is used for the upper section,
and the 'Wood Bass' sound is selected for the lower section.
Example: To select the 'Jazz Organ' sound for the
upper section, press the ORGAN button twice.
Example: To select the 'W. Bass & Ride' sound
for the lower section, press and hold the SPLIT
button, then press the BASS button four times.