Weber Platinum I 1200 NG Owner's Manual page 21

Step 19
Complete accessory installation
You will need: Warm-Up Basket, warming rack, work table,
two accessory trays, three tubing plugs, thermometer and
a hammer.
Insert one end of the Weber Warm-Up Basket into the hole
in the right end of the lid and the other end into the slot in
the left end of the lid. Figure 27 (a).
Set the warming rack into the slots at the rear of the
cooking box. Figure 27 (b).
Set the work table onto the left side rails. Figure 27 (c).
Set the accessory trays in place between the bottom
connectors. Figure 27 (d).
Insert the thermometer into its holder. Figure 27 (e).
Insert the tubing plugs into the ends of the frame. To fully
seat the plugs, you may have to tap them lightly with a
hammer. Figure 27 (f).
(a)
(b)
(e)
(c)
(f)
(d)
Figure 27
CAUTION: To keep the barbecue stationary, the tabs
on the locking casters should be in the down position.
21