Procedure For Flash Photography - Nikon Lite Touch Zoom 70 W Instruction Manual

Procedure for Flash Photography

1.
Press the
mode.
Since slow shutter speeds are usually selected in
Cancel) and
to prevent camera shake.
2. Compose the picture, then lightly press
the Shutter Release button.
3.
Check that the red LED lights up, then
shoot.
Flash shooting range
The reference distance values are shown below.
With ISO100 film speed:
(wide-angle) setting: approx. 0.9 to 3.3 m (3.0 to 10.9 ft.)
(telephoto) setting: approx. 1.2 to 1.9 m (4.0 to 6.2 ft.)
With ISO400 film speed:
(wide-angle) setting: approx. 0.9 to 6.6 m (3.0 to 21.8 ft.)
(telephoto) setting: approx. 1.2 to 3.8 m (4.0 to 12.5 ft.)
Do NOT press against the flash unit. If extra force is applied
to the flash unit, the red LED quickly blinks as a warning. (In
this case, the shutter is released, but the flash does not fire.)
button to select the Flash
(Slow Sync Flash) modes, use a tripod
Advanced Operations
(Flash
21