DTR-30.1_En_A.book 30 ページ 2009年4月9日 木曜日 午後1時30分
Connecting the AV Receiver—Continued
Connecting a VCR or DVD Recorder for Recording
Step 1: Video Connection
Make the video connection
type of connection.
Step 2: Audio Connection
Make the audio connection
Connection
A
a
Notes:
• The AV receiver must be turned on for recording. Recording is not possible while it's in Standby mode.
• If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV
receiver, connect the TV/VCR's audio and video outputs directly to the recording VCR's audio and video inputs. See
the manuals supplied with your TV and VCR for details.
• Video signals connected to composite video inputs can only be recorded via composite video outputs. If your
TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.
30
. The video source to be recorded must be connected to the AV receiver via the same
A
.
a
AV receiver
VCR/DVR OUT V
VCR/DVR OUT L/R
L
AUDIO
VCR, DVD recorder
Signal flow
VCR or DVD recorder
⇒
Composite video input
⇒
Analog audio L/R input
A
a
R
VIDEO
IN
IN