Offramp Gateway - Toshiba GA-1201 Quick Start Manual

Multifunctional digital systems scanning functions
Table of Contents

Advertisement

Offramp gateway

When an error has occurred in the offramp gateway function, check the setting by referring to
the list below.
No
Check Item
1
Are servers for forwarding
an InternetFax/Email to this
equipment set correctly?
2
Is the IP address of this
equipment correctly set?
3
Can you utilize the TopAc-
cess?
4
Are the settings for the DNS
session and DDNS session
enabled?
5
Is a setting for the offramp
gateway functions enabled?
6
Is a setting for the Fax func-
tions enabled?
7
Can you fax an InternetFax/
Email received from other
equipments to a G3 facsim-
ile?
Yes
No
Refer to an appropriate manual
and set the DNS server and
SMTP server correctly.
Next Step
If necessary, refer to the "Setting
up DNS Server and Mail Server"
in the Network Administration
Guide for Scanning Functions.
Refer to the Setup Guide for
Next Step
Printing Functions and set the
TCP/IP correctly.
Refer to the Setup Guide for
Next Step
Printing Functions and set the
HTTP correctly.
Refer to the Setup Guide for
Scanning Functions and set the
DNS session correctly. If the DNS
Next Step
server supports dynamic DNS, a
setting for DDNS session is also
required.
Refer to the Setup Guide for
Scanning Functions and set the
SMTP server of this equipment
correctly.
If "OffRamp Security" is set
Next Step
"Enable", the Fax number of a
destination (to which the Fax is
forwarded) must be registered
into the address book of this
equipment.
Refer to the Setup Guide for
Printing Functions or the Oper-
Next Step
ator's Manual for Facsimile
Function and perform a correct
Fax setting.
An error code is printed in the
Transmission/Reception Journal.
End
Refer to the "Error code list" in the
Network Administration Guide
for Scanning Functions.
Countermeasure
Troubleshooting
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents