Volvo S60 Owner's Manual page 169

07 Wheels and tyres
Changing wheels
6. Lift the car so that the wheel is free.
Remove the wheel bolts and lift off the
wheel.
Fitting the wheel
1. Clean the contract surfaces on the wheel
and hub.
2. Put on the wheel. Screw in the wheel bolts.
07
3. Lower the car so that the wheel cannot
rotate.
4. Tighten the wheel nuts crosswise. It is
important that the wheel nuts are tightened
properly. Tighten to 140 Nm. Check the
torque with a torque wrench.
168
5. Put on the wheel cover (steel rim).
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Ensure that passengers wait with the car -
or preferably a crash barrier - between them
and the road.
IMPORTANT
If TPMS is specified then the tyres must be
calibrated after fitting, see see page 165.