Table of Contents
Advertisement
6.2 System Setting
7) IP Setting
If the Network supports DHCP , IP settings can be allocated automatically. If the Network
does not support DHCP, the Addresses must enter manually (Static IP).<Figure 6.2.7>
- DHCP Usage : On/Off to receive IP settings automatically
- IP Address : Here enter the IP address
- Subnet Mask : Here enter Subnet Mask Number from your Network
- Gateway : Here enter IP address of Gateway (e.g. router)
- DNS : Here Enter IP address of main DNS Server
- Mac Address : Mac Address display
<Figure 6.2.7>
- Firmware update : Support download from a LAN.
BLUE button, appear input target IP address.
button to connect after input a target IP.
Choose a update software and
button for downloading.
Note : Have to run PC tool before connect PC.
<Figure 6.2.8>
<Figure 6.2.9>
23
6.2 System Setting
8) Data Transfer
Used to transfer data from another receiver. Select the appropriate caption and press
to confirm. <Figure 6.2.10>
- Firmware : Transfer the firmware of a receiver to another receiver.
- Channel Data : Transfer the channel data of a receiver to another receiver.
<Figure 6.2.10>
24
Advertisement
Table of Contents
