6.2 System Setting
5) Security Settings
To prevent unauthorized access of your receiver, you can set the PIN control password.
(Note that the factory set default password is : 0000. PIN and password are the same)
<Figure 6.2.5>
By setting any of the following functions to
access them;
- Receiver Lock, Install Lock, Channel Lock, Lock Channel Confirm
Age Limit (Parental Lock)
Under this menu you may select a Rating of programs you choose to block.
All available ratings are listed in the menu and when the program information regarding
the rating available from the broadcaster exceeds the selection, a PIN number is
required to access the program.
Use the scroll buttons to make your selection and press
This section also contains options to change and enter new passwords.
<Figure 6.2.5>
in this menu, the PIN will be required to
to confirm.
21
6.2 System Setting
6) Database Reset
<Figure 6.2.6>
This section allows you to reset the receiver to the factory settings.
- Delete Radio Channels : Erase all radio channels in the database.
- Delete Scramble Channels : Erase all scramble channels in the database.
- Delete All Channels : Erase all channels.
- Factory Set : Erase all channels and restore the factory default settings.
<Figure 6.2.6>
22