To Connect Using Wps; Pbc (Push Button Configuration) Method - TP-Link TL-WN821N User Manual

3.2 To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless router supports QSS or Wi-Fi Protected Setup (WPS), you can establish a
wireless connection between wireless card and router using either Push Button Configuration
(PBC) method or PIN method.

3.2.1 PBC (Push Button Configuration) method

1. Press the WPS/RESET button for 2~3 seconds on the back panel of the router. Here takes
router TL-WR841ND for example.
2. Press the WPS button on the adapter. There are two ways:
 Method One：
Press and hold the WPS button on the adapter directly for 2~3 seconds until Figure 3-11
appears.
TL-WN821N 300Mbps Wireless N USB Adapter
Figure 3-8
13