TP-Link TL-WN821N Quick Installation Manual

Quick
Installation
For Mac OS X
Guide
300Mbps Wireless N USB Adapter
This USB Adapter can be powered only by computers
MODEL NO. TL-WN821N
that comply with Limited Power Source (LPS).
7106506492 REV8.0.0
1
Connect to a Computer
Option 1: Directly Option 2: Via the USB Extension Cable
3
2
Install Driver and Utility Join a Wireless Network
a. Insert the CD. Option 1: Via TP-LINK Utility
Note: You can also download the driver and utility at
http://www.tp-link.com. a. Click
Utility) on the menu bar.
b. Browse the CD, go to TL-WN821N > Mac OS
X Driver, unzip the Mac OS X version.zip file b. Select your Wi-Fi network and enter the Wi-Fi
and run the Installer. password when prompted.
c. Follow the wizard to complete the installation.
SHELL
Installer.pkg uninstall.command
Option 2: Via Wi-Fi Protected Setup
(TP-LINK Wireless Configuration
a. Press the WPS button on your router.
b. In 2 minutes, press and hold the WPS button on
the adapter until the WPS Progress screen appears.
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-LINK_XXXX
TP-LINK_0001
TP-LINK_0903
TP-LINK_TEST_Device
Join Other Network
WPS
c.
When you are prompted "WPS Protocol Finished!",
Open Wireless Utility
click OK.
(WPS)