9. Under Internet Protocol, change the setting to No IP Address. Click Apply.
10. When the Browser Reload message appears, click OK.
11. The following settings take place once the DSL-2750B is in Bridge mode:
a. VPI/VCI: 0/35
b. Encapsulation: LLC
c. DHCP server is disabled for both wired/wireless clients
d. GUI is accessible only through 192.168.1.1 by a PC configured with static IP address of 192.168.1.x/24.
Note: Once you have configured the DSL-2750B for Bridge mode, release and renew your network adapter cards.
On a DHCP line, your PC will now receive a public IP address.
On a PPPoE line, you should receive a 169.254.x.x IP address. The GUI will not be accessible and you should get the
following message when trying to do so.
DSL-2750B User Guide
82