This page allows you to add traffic shaping rules. Click New Entry to add a rule.
Once you click New Entry, select the device/Gateway segment you want to configure from the drop-down
menu.
Tx Bandwidth:
Select the Tx traffic bandwidth from the drop-down. Select Specify to enter your own value,
Automatic, or Unlimited.
Select Enabled or Disabled.
TCP Serialization:
Queue Policy:
Select Class Based or Strict Priority.
Rx Bandwidth:
Select the Rx traffic bandwidth from the drop-down. Select Specify to enter your own
value, Automatic, or Unlimited.
Queue Policy:
Select Policer, Class Based or Strict Priority.
DSL-2750B User Guide
Traffic Shaping
51