Meridian Prime User Manual page 9

EN
Setting up for Windows 7/8
Install the USB2 driver
• Download and save the driver .zip file to a suitable location
such as the Desktop.
• Connect the Meridian Prime Headphone Amplifier to the
computer via USB ignoring any Windows driver installation
notifications.
• Double click the .zip file and open the enclosed folder.
• Run the driver installer by double clicking the setup
application.
• On the next window, allow the installer to make changes to
the computer.
• Click Install to start the driver instillation and follow the
installer instructions.
• Click Finish when done.
• Restart the computer.
Configure the Meridian Prime Headphone Amplifier
• Connect the Meridian Prime Headphone Amplifier.
Open the Sound control panel (Start ‡ Control Panel
•
‡ Hardware and Sound ‡ Sound)
• Click the Playback tab.
• Find Meridian Prime
right click and select Set as Default Device.
• Click Apply.
Optionally for best sound quality
• Connect the Meridian Prime Headphone Amplifier.
Open the Sound control panel (Start ‡ Control Panel
•
‡ Hardware and Sound ‡ Sound).
• Click Meridian Prime
list.
Headphone Amplifier in the list,
Headphone Amplifier in the
Meridian Prime Headphone Amplifier User Guide
Click the Sounds tab.
•
Select No Sounds from the Sound Scheme drop-down
•
list and click Apply.
• Click the Playback tab.
• Double click Meridian Prime
the list.
• Click the Enhancements tab.
• Set Disable all enhancements and click Apply.
• Click the Advanced tab.
• If not already set, set both options in the Exclusive Mode
box.
Select the desired bit/sample rate in the Default Format
•
drop-down list box and click Apply.
Support
For more detailed support please visit:
www.meridian-audio.com/support
Headphone Amplifier in