Motorola BLE Series Installation And Operation Manual page 21

Mo d el D es c r i p ti on
FTEC
Fast Transfer Electronic Crowbar
LL-BLE-HMS
Status monitor module
BLE,
Deep housing cover
cover/status
monitor
RCB87
Response Correction Board
JXP-RPC
Return Path Correction board
ICS
Ingress Control Switch
F u n c tio n
This option is used for overvoltage protection and replaces the
existing surge protector.
This module enables monitoring of the unit's operating parameters
by the LIFELINE status-monitoring system. This accessory also
requires the deep housing cover.
This optional cover is required to contain the LIFELINE status
monitor module.
This optional board compensates for system roll-off at 870 MHz.
The BLE*/* is shipped with a jumper in this location which you
can replace when additional response correction is required.
This optional board provides additional flatness response
correction in the return path for systems that must meet especially
stringent return path flatness requirements.
This option enables remote monitoring, isolation, and reduction of
ingress on the return path by providing signal attenuation of 6 dB
or cutoff of 38 dB typical. The unit is shipped with a jumper in this
location.
B L E * / * I n s t a l l a t i o n a n d O p e r a t i o n M a n u a l
O v e r v i e w 2 2 2 2 - - - - 1 1 1 1 1 1 1 1