PRIMERGY BX924 S3 System configurator and order-information guide January 2014 Contents Instructions Configuration diagram Configurator BX924 S3 Dual Socket Processor Storage XIII Memory iRMC S3, Graphics Mezzanine Cards PRIMERGY Server...
Page 2
System configurator and order-information guide PRIMERGY BX924 S3 Status: 2013-12-30 Instructions This document contains basic product and configuration information that will enable you to configure your system via System-Architect. Only the tool "System-Arcitect" will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.
Page 3
System configurator and order-information guide PRIMERGY BX924 S3 Status: 2013-12-30 Configuration diagram Dual Server Blade BX924 S3 Mezzanine slot 1 Row 1 (3 DIMMS) FC Mezz. card CPU1 1/10 GbE Mezz. card Row 2 (3 DIMMS) IB Mezz. card Intel CPU CNA Mezz.
Page 4
- iRMC S3 on-board - 1x front side USB connector - Special connector for Y-cable (2x USB, 1x VGA). The BX924 S3 Server Blade can be installed max. 18x in the BX900 S1 System Unit S26361-K1407-V200 S26361-F4478-L2 PY BX924 S3 Dual Server Blade...
System configurator and order-information guide PRIMERGY BX924 S3 Status: 2013-12-30 Processor Section There are 2 processor sockets available. A multi-processor operating system is required for a dual-processor system. The system can be equipped with two SSDs The first optional SSD is mounted under the Mezz. Card 1 slot The second optional SSD is mounted on top of the front CPU Note: Max.
No mixing of SAS and SATA SSDs allowed S26361-F4008-E3 S26361-F4008-E4 Using the S26361-F4008-E4 BX924 S3 disk mount. kit (PCH) BX924 S3 disk mount. kit (SAS RAID) requires the SAS Mezz Card supports up to 2 SSDs supports up to 2 SSDs and the SAS connection kit connected to onboard PCH connected to SAS RAID Mezz.
System configurator and order-information guide PRIMERGY BX924 S3 Status: 2013-12-30 Section Memory - There are 12 memory slots per CPU for max. 384GB LRDIMM (12x 32GB 4R) 192GB RDIMM (12x 16GB 2R) 32GB UDIMM (8x 4GB) => max. 768GB for two CPU`s ( 384GB per CPU ), using LRDIMM...
Page 8
System configurator and order-information guide PRIMERGY BX924 S3 Status: 2013-12-30 S26361-F3694-E10 Independent Mode Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined Requires min 1 memory Module per CPU S26361-F3694-E1 Rank Sparing Mode Installation BIOS Setup factory preinstalled to this mode.
Page 9
PRIMERGY BX924 S3 Status: 2013-12-30 Memory Configuration PRIMERGY BX924 S3 Each CPU offers 12 Slots for DDR3 Memory Modules organised in 3 Banks and 4 Channels. If you need more than 12 Slots you have to configure the 2nd CPU.
System configurator and order-information guide 1. Independent Channel Mode PRIMERGY BX924 S3 Status: 2013-12-30 required required if 2nd CPU is configured Bank I Data Data Data Data Data Data Data Data optional, same type in Bank per CPU (black sockets)
System configurator and order-information guide 4. Rank Sparing Mode PRIMERGY BX924 S3 Status: 2013-12-30 1-Rank Memory modules (RDIMM) required required if 2nd CPU is configured Bank I optional, same type in Channel per CPU Spare Spare Spare Spare Spare Spare...
System configurator and order-information guide PRIMERGY BX924 S3 Status: 2013-12-30 iRMC S3, Graphics Section Graphic Controller is part of the onboard Management Controller iRMC S3. Other graphics are not possible. The iRMC S3 advanced pack is included in the system delivery.
Page 13
2012-06-28 S26361-F4478-L2 New Y Cable 2 end 2012-04-24 S26361-F4481-E1/E30 SAS RAID Mezz - not yet released for BX924 S3 2012-04-20 Memory voltage / frequency spreadsheet, 3DPC at 1.5V only 2012-03-23 Removed link from SAS HBA Mezz. to SSD Connection Kit.