Innovative Technology Dock & View ITITV-2012 User Manual page 5

Dock & view
Table of Contents

Advertisement

Remote Control
1. Infrared Transmitter
2. Standby
button ----- Turn the unit on / off
3.
button ----- Play / Pause iPod (iPhone/iPad) music
4.
button-----Skip tracks Forward; perform high-speed search
5.
button---- iPod Repeat button
6.
button ---- iPod menu Down button
7. VOL + / - button --- Adjust volume level up or down
8.
button ----- iPod menu Up button
9.
button ----Skip tracks Backward ; perform high-speed search
10.
button ----- iPod Shuffle button
11. MENU button ----- iPod menu button
12. ENTER button ----- iPod menu confirm selection button
13. MUTE button ----- Mute the volume
14. Battery Compartment
Playback iPad / iPhone / iPod Music or Video Clip
This model can be used with a variety of different iPad / iPhone / iPod models.
Connect one end of a RCA video cable to the rear RCA video out socket on the dock unit.
Connect the other end of the RCA cable to VIDEO-IN of the television or video display.
Connect the left and right audio channel RCA audio cable to the rear RCA L/R audio out
socket on the dock unit.
Connect the other end of the left and right channel RCA audio cable to L/R audio-in
connector of the television or other external audio amplifier.
Insert your iPad / iPhone / iPod into the docking port by placing the connector on the bottom
of the iPad / iPhone / iPod onto the connector at the docking platform.
Caution:
Please be careful when seating the iPad / iPhone / iPod into the docking port to avoid
damaging the 30-pin connector on the iPad / iPhone / iPod or in the docking system.
Press the Standby
To turn off the unit, press the Standby
TIPS: Remove the dock cover before you dock your device.
(A) The Primary Docking Station
Listening to iPad / iPhone / iPod music
From the remote control
You may press the VOL + / - button to adjust the volume to a desired level.
Note: The volume level cannot be adjusted using the volume control on your iPad/iPhone/iPod
after being docked. Use the included remote to adjust the volume during playback.
Press the
button to pause or resume the iPad/iPhone/iPod playback.
Press the
/
Press and hold the
To set iPod music play-mode in random, press the SHUFFLE
To set iPod music in repeat play-mode, press the
To mute the volume, press the MUTE button. Press the MUTE button again to resume
listening to the music.
To access iPod / iPhone menu, press the MENU button (not applicable for iPad).
Description of Parts
button to turn on the unit. The Standby indicator lights up.
button to skip to the next or previous song.
/
button for fast-forwarding or fast-rewinding during playback.
button and the Standby indicator will turn off.
button.
5
button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents