Appendix. Cru Instructions; Replacing The Battery - Lenovo G400 User Manual

Appendix. CRU instructions

Notes:
• The illustrations used in this appendix are for the Lenovo G400, unless otherwise stated.
The following steps about upgrading and replacing devices are the same for the G400 and
•
G500/G405/G505/G410/G510.
Make sure the battery has been removed before replacing any devices.
•

Replacing the battery

Note:Use only the battery provided by Lenovo. Any other battery could ignite or explode.
To replace the battery, do the following:
1 Turn off the computer. Disconnect the AC power adapter and all cables
from the computer.
2 Close the computer display, and turn the computer over.
3 Unlock the manual battery latch
in the unlocked position
shown by the arrow
4 Install a fully charged battery.
5 Slide the manual battery latch to the locked position.
6 Turn the computer over again.
7 Connect the AC power adapter and the cables to the computer.
b
.
c
a
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
. Hold the spring-loaded battery latch
a
, remove the battery pack in the direction
c
b
31