Appendix A. CRU instructions
Note: The CRU service is only applicable to certain countries.
CAUTION:
Set the built-in battery in Ship Mode before replacing a CRU or sending your computer for
service.
1
Turn off the computer and disconnect the AC adapter.
2
Press Fn S V.
3
Press the Power button to verify if Ship Mode has been set.
Note: When set in Ship Mode, the battery does not supply power to the computer. To awake the battery from
Ship Mode, connect the AC adapter to your computer.
Replacing the keyboard
To replace the keyboard, do the following:
1
Turn off the computer; then disconnect the AC power adapter and all cables from the
computer.
2
Close the computer display, and then turn the computer over.
3
Remove the screws that secure the keyboard
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
.
26