Assembling Your Polycom Cx700 Ip Phone; Connecting The Handset And Optional Headset - Polycom CX700 User Manual

Assembling Your Polycom CX700 IP Phone

Connecting the Handset and Optional Headset

• Quick Start Guide and registration card
Check this list before installation to ensure that you have received each item.
If you are missing any items, contact your system administrator.
This section describes how to assemble your Polycom CX700 IP phone:
• Connect handset and headset (optional)
• Connect to the network
• Connect to your computer using USB cable (optional)
• Adjust phone base
If your phone is already assembled, go directly to
CX700 IP Phone on page 1-7.
To connect the handset and optional headset:
1. Connect one end of the phone cord to the handset and the other end of
the cord to the handset jack on the back of the phone.
2. Connect the headset (optional) to the headset jack on the back of the
phone (next to the handset jack).
Getting Started with Your Polycom® CX700 IP Phone
Features of Your Polycom
1 - 3