ZyXEL Communications NWD-211AN User Manual page 43

Table 12 ZyXEL Utility: WPS (continued)
LABEL
SSID
BSSID
Channel
Authenticati
on
Encryption
WPS Profile List
Profile
SSID
Authenticati
on
Encryption
Rescan
Information
PIN Code
Config Mode
Profile Detail
Connect
Disconnect
Import Profile
NWD-211AN User's Guide
DESCRIPTION
This field indicates the AP's Service Set Identification (SSID)
This field indicates the AP's Basic Service Set Identification (BSSID)
This field indicates the channel on which the AP is broadcasting.
This field indicates the type of authentication required by the AP.
This field indicates the type of encryption used by the AP.
This section displays a profile for the current WPS connection.
Note: This section is not used with WPS in Enrollee mode.
This field indicates the profile name. Profiles created on the fly are
named Profile# where # is a number. For example, Profile1.
This field indicates your profile's unique SSID.
This field indicates the authentication type required by your NWD-
211AN while using WPS.
This field indicates the encryption required by your NWD-211AN while
using WPS.
Click this button to rescan the local area for WPS-compatible devices.
Select an AP from the WPS AP List and then click this button to display
detailed information on it.
See Section 3.10.1 on page 44
This field displays a randomly generated 8-digit personal identification
code for your NWD-211AN. In Enrollee mode it is not editable, but in
Registrar mode it is. Click the Renew button to randomly generate a
new PIN code.
Select either Enrollee or Registrar.
As a WPS enrollee, your device can make basic WPS connections with
minimal configuration. As a WPS registrar you can set your device to
store all your connection information as a profile, which you can later
use again by activating it on the Profile screen.
By default, we suggest that you keep the device in Enrollee mode.
Select a profile from the WPS Profile List, then click this button to
view detailed information about it.
See Section 3.10.2 on page 45
Select a profile from the WPS Profile List, then click this button to
make a connection using the previously saved settings associated with
the profile.
Press this button to disconnect from the network represented by the
currently active profile.
Click this button to save any profile that has been created on the fly for
the purposes of making a WPS connection. Your profile is saved in the
Profile screen.
Chapter 3 ZyXEL Utility
for more details.
for more information.
43