ZyXEL Communications NWD-211AN User Manual page 40

Chapter 3 ZyXEL Utility
Table 10 ZyXEL Utility: Statistics (continued)
LABEL
Frames
Failed to
Receive ACK
After All
Retries
RTS Frames
Successfully
Received
CTS
RTS Frames
Failed to
Receive CTS
Receive
Statistics
Frames
Received
Successfully
Frames
Received
with CRC
Error
Frames
Dropped
Due To Out-
of-Resource
Duplicate
Frames
Received
RESET
COUNTERS
40
DESCRIPTION
This displays the number of frames transmitted by the NWD-211AN that
did not receive an acknowledgement response from the other wireless
device.
This displays the number of frames, large enough to require the sending
of a "Request to Send" message, that then received a "Clear to Send"
message from the other wireless device.
This displays the number of frames, large enough to require the sending
of a "Request to Send" message, that did not receive a "Clear to Send"
message from the other wireless device.
This section displays statistics about the data frames received by the
NWD-211AN.
This displays the number of frames received by the NWD-211AN
without error.
This displays the number of frames received by the NWD-211AN that
contained a Cyclic Redundancy Check error. Cyclic Redundancy Checks
are used to determine whether received data has been altered in transit
(by radio interference, for example).
This displays the number of frames that were not processed because
the NWD-211AN did not have the necessary memory.
This shows the number of received frames that were identical to other
received frames.
Click this to turn all the counters back to zero.
NWD-211AN User's Guide