HP SN8000D Specifications page 34

QuickSpecs
Technical Specifications
Power
Certified maximum
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Supported power range
Power Supplies
Power Cables
Please Refer to SAN Design Guide at the following URL: http://www.hp.com/go/sandesignguide.
DA - 12993 Worldwide — Version 39 — December 20, 2013
HP SN8000B and DC SAN Director Family
Nominal
In-rush current
Input frequency range
Two power supplies
included with each director
The DC SAN Directors come
with:
110-240 VAC, single phase
60A maximum, peak
47-63 Hz
Output voltages (each): 48V at 20 amps
12V at 4 amps
Maximum output power: 2000 watts
AC inrush current: 20A maximum, peak
two 220V US power cords
2 C19-C20 220V PDU jumpers.
Page 34