General Settings; Main Unit Settings - Eclipse AVN4400 Owner's Manual

Introduction
6

General settings

Main unit settings

You can perform various settings for this unit.
Hold down the
off the audio mode.
Hold down the
Carry out settings for the various items.
Setting screen1
Items
Enable guide tone
Enable AUX
Enable VTR
Dim sub-display
Link night view to headlight
Illumination
Voice guidance
Camera setting
Radio area
(North American models only)
*: This operation only switches the settings of the main unit. The PND map will not
be switched.
With regards to Radio Area, please ensure that you set the system for your area.
Touch
button for more than one second to turn
SRC
button for more than one second.
CTRL
Touch
Turns the guide tone setting ON/OFF.
Turns the AUX setting ON/OFF.
Turns the VTR setting ON/OFF.
If "Enable" has been set and the car lights (side lights, tail lights, license
plate light) are turned ON, the brightness of the sub-display can be
adjusted.
If "Enable" has been set, the PND display switches to the night view mode
when the car lights come ON.
Illumination colors can be selected from "Blue" or "Red".
The voice guidance of the navigation system can be selected to come
from either the left or right speaker.
Camera setting can be selected from "AUTO" or "MANUAL".
For AUTO: Switches to the camera image when shifted into reverse gear.
For MANUAL: The camera image is displayed only by pressing
SCREEN AV/NAV
Radio broadcast can be selected from "US", "Latin" or "Asia".
.
Done
.
Next
Contents
for at least one second.
17
Setting screen2
*