Rollover Protection System (Rops) - Husqvarna M-ZT52 Operator's Manual

Ride-on mower
Hide thumbs Also See for M-ZT52:
Table of Contents

Advertisement

Rollover Protection System (ROPS)

The ROPS increases the basic weight of the unit by 73
lbs/33 kg.
Do not use ROPS as a lifting, attaching or
anchoring point.
Do not use ROPS for wrecking or towing.
Do not exceed Max GVW: 2822 lbs/1283 kg.
Read machine's operator manual before each use.
Securely fasten the seat belt if the unit has a
ROPS.
Where possible, avoid operating the unit near
ditches, embankments and holes.
Reduce speed when turning, crossing slopes and
on rough, slick or muddy surfaces.
Stay off slopes too steep for safe operation.
Watch where you are going, especially at row
ends, on roads and around trees.
Do not permit others to ride.
Operate the mower smoothly - no jerky turns,
starts or stops.
When mower is stopped, set brakes securely and
use park brake.
If any part of ROPS is damaged, the entire ROPS
must be replaced.
Check all bolts including seat belt for correct
torque before each use.
Check ROPS structure for damage before each
use.
ROPS bar is NOT intended for use in sub zero
temperatures.
SAFETY
WARNING!
The rollover protection system's
capabilities may be impaired by damage
if the mower is overturned or if alteration
to the ROPS occurs. If these conditions
take place, the total structure MUST be
replaced.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-zt61967177005

Table of Contents