CE Regulatory Notice
Here with confirm to comply with the requirements set out in the Council Directives on the
Approximation of the Laws of the Member States relating Electromagnetic Compatibility of Radio
and Telecom device (1995/5/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The
Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive
(2002/95/EC), Turkish EEE Directive; the Commission Regulation (EC) No 1275/2008
implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to
eco-design requirements for standby and off mode electric power consumption of electrical and
electronic household and office equipment, and the Directive 2009/125/EC of the European
parliament and of the council establishing a framework for the setting of eco-design
requirements for energy-related products.
Notes on Installation
Install the device near the rear-view mirror to obtain the best open-field
view. Do NOT install the camcorder in a location that will obstruct your
required driving view.
Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
Do not touch the lens with your fingers. Finger grease may be left on the
lens and will result in unclear videos or snapshots. Clean the lens on a
Do not install the device on a tinted window. Doing so may damage the
Make sure that the installation position is not hindered by the tinted
Use the authorized charger only.
Never disassemble or attempt repair of this product. Doing so may
damage the camcorder, cause electric shock and void your product
Never short-circuit the battery.
Exposing the camcorder to open flames can cause explosion.
Due to local laws and vehicles safety considerations, do not manually
operate the device while driving.