Using The Capture & Draw Mode; Capture & Draw Mode Operational Flow - Casio YA-W72M User Manual

Using the Capture & Draw Mode
The Capture & Draw Mode lets you capture the computer screen image (being projected onto the dot
screen), and then write or draw on the captured image using the digital pen. Note that IWB for CASIO
toolboxes and windows are not included in the captured image. Captured images containing drawn or
written data can be stored as editable format (DST) files, or as non-editable image (png, jpg, or bmp)
files.
Capture & Draw Mode Operational Flow
This following is the operational flow for capturing a computer screen image and drawing on it in the
Capture & Draw Mode.
(1) Project the computer screen image you want to capture and draw on.
The primary computer display device must be the one being projected onto the dot screen. See
the "Important!" notes below.
(2) Start up IWB for CASIO, enter the Capture & Draw Mode, and perform the screen capture
operation.
(3) Draw on the captured image as desired.
As soon as you capture a screen image in the Capture & Draw Mode, the digital pen
automatically switches to a mode for drawing on the image. For details, see "Capturing and
Drawing on the Currently Displayed Computer Screen Image" (page 52).
Important!
If the computer has multiple display devices connected (such as when a laptop computer is
connected to the projector), make sure that the primary display device of the computer is
being projected onto the dot screen. Computer screen capture in the Capture & Draw Mode
can only capture the computer's primary display device.
If the computer's primary display device is not the one being projected onto the dot screen,
perform the required operation on the computer to change its display settings so that the
primary display device is being projected. After changing the computer's display settings, be
sure to perform the operation under "To perform calibration" (page 28) again to re-calibrate.
51