Import; Note On Sptgen Files; Figure 27 Import Product Type - ZyXEL Communications APS 1.0 Administrator's Manual

2 The Import SPTGEN from field can be empty. You may import a SPTGEN file later
using the import function.
3 Click the Submit button to add a new product type into the server.

5.6.5 Import

Product Type > Import
Administrators can import a SPTGEN file associated with the selected product type. See
Section 3.5 on page 25

Figure 27 Import Product Type

1 You must select a product type from the drop-down list box.
2 You must select a valid SPTGEN file, the server will check the syntax. If the product
already exists, all of its parameters will be overwritten by this action.
5.6.6 Notes on SPTGEN Files
It is recommended that your SPTGEN file only include VoIP and auto provisioning settings. It
is not recommended to you include things like Internet access settings. For example, you
would not want to assign the same PPPoE username and password to all of the auto-
provisioned devices of the same product type.
Your SPTGEN file should include "
Note: Make sure you remove any blank lines or extra spaces from the file.
The following example lists some key SIP account one settings as a sample. You can actually
include all of the VoIP and auto provisioning settings. The auto provisioning server uses the
information in the unit device file to specify individual account VoIP information even if you
include it in the SPTGEN file.
Chapter 5 Using the Auto Provisioning Server
for how to get an SPTGEN file from a device.
/ Menu 1 General Setup
Auto Provisioning Administrator's Guide
" at the beginning.
57